Cellulose Acetate Membrane Filters
• Composed of cellulose di- and triacetate, these filters exhibit low static charge and high strength
• May be sterilized repeatedly without loss of integrity or change in bubble point
• Extremely low aqueous extractables (0.1 wt%)
• Good resistance to heat and low molecular weight alcohols (compared to MCE membranes)
• Use for filtration of enzyme solutions, diagnostic cytology, or receptor binding studies
Product Specifications: Cellulose Acetate Membrane Filters
Pore Size
(μm) |
Bubble Point1 |
Flow Rates2 |
Porosity3
(%) |
MPa |
psi |
Acetone
(mL/min/cm2) |
Air
(L/min/cm2) |
0.20 |
≥0.25 |
≥37.1 |
16 |
2 |
66 |
0.45 |
≥0.17 |
≥25.9 |
35 |
4 |
68 |
0.80 |
≥0.068 |
≥10.0 |
160 |
14 |
72 |
3.00 |
≥0.034 |
≥5.0 |
500 |
54 |
78 |
Notes:
1. Bubble Point is the minimum pressure required to force air through a membrane which has been prewet with water.
2. Flow Rates indicate initial flow rate at 10 psi using a KGS 47 filter holder:
Water: using prefiltered (0.1μm) water
Air: using prefiltered nitrogen
3. Porosity refers to the percent open area.
Ash Content (ppm): Cellulose Acetate Membrane Filters
Ordering Information: Cellulose Acetate Membrane Filters
Plain White Disks
Pore Size
(μm) |
φ13 mm |
φ25 mm |
φ37 mm |
φ47 mm |
φ90 mm |
φ142 mm |
φ293 mm |
Package of 100 |
Package of 25 |
0.20 |
C020A013A |
C020A025A |
C020A037A |
C020A047A |
C020A090A |
C020A142A |
C020A293A |
0.45 |
C045A013A |
C045A025A |
C045A037A |
C045A047A |
C045A090A |
C045A142A |
C045A293A |
0.80 |
C080A013A |
C080A025A |
C080A037A |
C080A047A |
C080A090A |
C080A142A |
C080A293A |
3.00 |
C300A013A |
C300A025A |
C300A037A |
C300A047A |
C300A090A |
C300A142A |
C300A293A |
|
|
Plain White Rolls
Pore Size
(μm) |
Single Roll,
33cm x 3m |
0.20 |
C020A330R |
0.45 |
C045A330R |
0.80 |
C080A330R |
|